BZ-8802-1-G
???
Product Introduction:
? It is widely used in the infusion or approval of LED lighting products or other electronic appliances;
? The glue has high light transmittance, forms an excellent transparent protective layer, and has strong UV resistance；
? It has good heat dissipation, which can ensure that the service life of the components will not be affected by excessive temperature during use；
?The glue has good waterproof and moisture-proof performance, and the water is lit without fog;
? It has excellent weather resistance and can ensure that the lighting can be used normally in a wide temperature range (-60~200°C) environment, so that the use of the lighting is almost unlimited;
Basic parameters of the product (non-absolute value, for reference only):
| Indicators | Curing agent 8802-1-GA | Resin agent 88002-1-GB |
| Appearance | Transparent | Transparent |
| Viscosity (CPS) | 10000±2500 | 50±5 |
| Mixed viscosity (CPS) | 5000±1000 | |
| Density(g/cm3 .25℃) | 0.96±0.05 | 0.99±0.05 |
| Usage ratio (weight ratio) | A:B=4:1 | |
| Pot life 100g (min. 25 ℃) | 15±5 | |
| Curing conditions | Room temperature | |
| Gel time (min.25 ℃) | 45 | |
| Color (After curing) | Transparent | |
| Hardness (ShoreA/D) | 20±5A | |
| Curing time （23~25℃） | 1.5-2.5H | |
| Curing time (Heating) | / | |
| Temperature resistance (℃) | -60℃~200℃ | |
| Water absorption (24H) | ≤0.5% | |
| Anti-UV Grade（GB/T14522-2008） | / | |
| Volume resistivity (?.cm) | 1.0×1013 | |
| Dielectric constant (1K Hz) | 3.8 | |
| Tensile strength (MPa) | / | |
| Ultimate elongation（%） | / | |
| Average coefficient of linear expansion | 195×10-6K-1 | |
The online data is for reference only, please contact us to get the latest version, and the official TDS data shall prevail.
020-82020962
hyp@gzbaizhuang.com
